Страница 14 из 21
Re: My train collection
Добавлено: Вт окт 31, 2017 2:06 pm
ivan
And because the model of TEP70 is higher then it have to be, Igor made the cowcatcher lower then it need. I want to make new ones because if I make height according to original TEP70, the caucatcher will slide on the rails.
Re: My train collection
Добавлено: Вт окт 31, 2017 3:23 pm
Swede
ivan писал(а): ↑Вт окт 31, 2017 1:57 pm
Swede, I don't know about the old e 151 - it could be with another gears inside.
I use the newone because it has new metall bogies with new plate.
Metal bogies gives litlle additional weight. And I don't want to use Igor's plastic frame because it's plastic. That's why I ordered long Roco metal frame - I want to make something like I did with TEP10
viewtopic.php?f=19&t=10437 (metal frame from Taurus and bogies, motor, plate from BR120/M62)
I will cut the fuel tank from Igor's frame and connect it by glue with metal frame.
So you're going to make a pretty big modification to it. I actually think it works pretty well straight out of the box. And I don't really see the weight as an issue.
About sound - all main sounds will be same with 132 because same engines. But something could be diffrerent - maybe some talks on the station will be in German.
Kind regards,
Ivan
Well, my Piko РЖД ЧМЭ3 has Czech station announcements. But now I know how to fix that. As the decoder I have ordered for the ТЭП70 is specifically for thay locomotive, I hope all the sounds will be correct.
ivan писал(а): ↑Вт окт 31, 2017 2:06 pm
And because the model of TEP70 is higher then it have to be, Igor made the cowcatcher lower then it need. I want to make new ones because if I make height according to original TEP70, the caucatcher will slide on the rails.
I did notice that the cowcatchers were pretty low on my model, but didn't think much of it as they are still above the railhead. But I didn't think that was the reason for it.
Re: My train collection
Добавлено: Вт окт 31, 2017 7:58 pm
2TE10M
Good Evening,
here a little Video
https://www.youtube.com/watch?v=Nz1QuUG ... e=youtu.be
greetings
Christoph
Re: My train collection
Добавлено: Вт окт 31, 2017 8:13 pm
Swede
Wow, that sounds wonderful! And that is the BR132 audio file?
Re: My train collection
Добавлено: Вт окт 31, 2017 8:26 pm
2TE10M
Yes.
This sound can be downloaded at ESU. But I changed it. You need to modify a prgram sound decoder (~ 100 €) and a loc programmer (~ 140 €).
Or you have a friend, model railway shop who can program this for you.
http://www.esu.eu/en/products/lokprogrammer/
Christoph
Re: My train collection
Добавлено: Вт окт 31, 2017 8:38 pm
Swede
I do have a friend who can help me if I need it, but in this case, as I have already ordered a decoder with sound installed, it's not necessary. Except for maybe changing a few settings. If that's possible. I'm not sure, but the friend in question thought the decoder might be "locked" and would require a special programmer to change things.
I have a model railway shop that can help too, but they charge for it.
Re: My train collection
Добавлено: Вт окт 31, 2017 8:42 pm
M.W.
different motors
BR132 - 1А-5Д49
TEP70 - 2А-5Д49
Re: My train collection
Добавлено: Вт окт 31, 2017 8:43 pm
Swede
M.W. писал(а): ↑Вт окт 31, 2017 8:42 pm
different motors
BR132 - 1А-5Д49
TEP70 - 2А-5Д49
Is there a big difference between them?
Re: My train collection
Добавлено: Вт окт 31, 2017 8:53 pm
M.W.
Swede писал(а): ↑Вт окт 31, 2017 3:23 pm
Well, my Piko РЖД ЧМЭ3 has Czech station announcements. But now I know how to fix that. As the decoder I have ordered for the ТЭП70 is specifically for thay locomotive, I hope all the sounds will be correct.
CV48=1
Re: My train collection
Добавлено: Вт окт 31, 2017 8:57 pm
M.W.
Swede писал(а): ↑Вт окт 31, 2017 8:43 pm
Is there a big difference between them?
http://poznayka.org/s1572t1.html
2А-5Д49 (Д100)
http://poznayka.org/baza1/200318745108. ... age062.png
1А-5Д49 (Д40)
http://poznayka.org/baza1/200318745108. ... age064.jpg
TEP70 - more accelerated modification of diesel engines