My train collection
-
- Сообщения: 3842
- Зарегистрирован: Сб ноя 06, 2010 12:53 pm
- Благодарил (а): 1398 раз
- Поблагодарили: 813 раз
Re: My train collection
And because the model of TEP70 is higher then it have to be, Igor made the cowcatcher lower then it need. I want to make new ones because if I make height according to original TEP70, the caucatcher will slide on the rails.
-
- Сообщения: 187
- Зарегистрирован: Вс фев 14, 2016 6:16 pm
- Благодарил (а): 21 раз
- Поблагодарили: 5 раз
Re: My train collection
So you're going to make a pretty big modification to it. I actually think it works pretty well straight out of the box. And I don't really see the weight as an issue.ivan писал(а): ↑Вт окт 31, 2017 1:57 pmSwede, I don't know about the old e 151 - it could be with another gears inside.
I use the newone because it has new metall bogies with new plate.
Metal bogies gives litlle additional weight. And I don't want to use Igor's plastic frame because it's plastic. That's why I ordered long Roco metal frame - I want to make something like I did with TEP10 viewtopic.php?f=19&t=10437 (metal frame from Taurus and bogies, motor, plate from BR120/M62)
I will cut the fuel tank from Igor's frame and connect it by glue with metal frame.
Well, my Piko РЖД ЧМЭ3 has Czech station announcements. But now I know how to fix that. As the decoder I have ordered for the ТЭП70 is specifically for thay locomotive, I hope all the sounds will be correct.About sound - all main sounds will be same with 132 because same engines. But something could be diffrerent - maybe some talks on the station will be in German.
Kind regards,
Ivan
I did notice that the cowcatchers were pretty low on my model, but didn't think much of it as they are still above the railhead. But I didn't think that was the reason for it.
Re: My train collection
Good Evening,
here a little Video
https://www.youtube.com/watch?v=Nz1QuUG ... e=youtu.be
greetings
Christoph
here a little Video
https://www.youtube.com/watch?v=Nz1QuUG ... e=youtu.be
greetings
Christoph
-
- Сообщения: 187
- Зарегистрирован: Вс фев 14, 2016 6:16 pm
- Благодарил (а): 21 раз
- Поблагодарили: 5 раз
Re: My train collection
Yes.
This sound can be downloaded at ESU. But I changed it. You need to modify a prgram sound decoder (~ 100 €) and a loc programmer (~ 140 €).
Or you have a friend, model railway shop who can program this for you.
http://www.esu.eu/en/products/lokprogrammer/
Christoph
This sound can be downloaded at ESU. But I changed it. You need to modify a prgram sound decoder (~ 100 €) and a loc programmer (~ 140 €).
Or you have a friend, model railway shop who can program this for you.
http://www.esu.eu/en/products/lokprogrammer/
Christoph
-
- Сообщения: 187
- Зарегистрирован: Вс фев 14, 2016 6:16 pm
- Благодарил (а): 21 раз
- Поблагодарили: 5 раз
Re: My train collection
I do have a friend who can help me if I need it, but in this case, as I have already ordered a decoder with sound installed, it's not necessary. Except for maybe changing a few settings. If that's possible. I'm not sure, but the friend in question thought the decoder might be "locked" and would require a special programmer to change things.
I have a model railway shop that can help too, but they charge for it.
I have a model railway shop that can help too, but they charge for it.
-
- Сообщения: 187
- Зарегистрирован: Вс фев 14, 2016 6:16 pm
- Благодарил (а): 21 раз
- Поблагодарили: 5 раз
-
- Сообщения: 293
- Зарегистрирован: Вс июл 24, 2011 4:55 pm
- Откуда: Москва
- Благодарил (а): 56 раз
- Поблагодарили: 44 раза
-
- Сообщения: 293
- Зарегистрирован: Вс июл 24, 2011 4:55 pm
- Откуда: Москва
- Благодарил (а): 56 раз
- Поблагодарили: 44 раза
Re: My train collection
http://poznayka.org/s1572t1.html
2А-5Д49 (Д100)
http://poznayka.org/baza1/200318745108. ... age062.png
1А-5Д49 (Д40)
http://poznayka.org/baza1/200318745108. ... age064.jpg
TEP70 - more accelerated modification of diesel engines
Последний раз редактировалось M.W. Вт окт 31, 2017 9:03 pm, всего редактировалось 2 раза.
С Уважением, Михаил.